-6.png?w=1536&h=1536)
-4.png?w=1536&h=1536)
-6.png?w=1344&h=1792)
-22.png?w=1536&h=1536)
-6.png?h=1536&q=80&w=1536)
-4.png?h=1536&q=80&w=1536)
-6.png?h=1792&q=80&w=1344)
-22.png?h=1536&q=80&w=1536)
FEGVE Tetrach2.0 accessory - tritium tube tritium tube self luminous for about 25 years (only for Kickstarter supporters)
-
Free worldwide shipping
-
Free returns
-
Carbon neutral
-
Secure payments
Self luminous tritium trachea introduction: Brand: Switzerland MB Origin: Switzerland
Source: Independent first-hand source (Rui:
Must read before shooting: The unit price of this link is for one tritium trachea, and the product is cylindrical in shape and size
Expressed as diameter * length, with dimensions in millimeters (mm). The large tritium trachea appears white or colored in bright light, with no visible emission, only visible in dark areas
Bright.
The tritium trachea does not require absorption of external light sources or charging, and theoretical data shows that it can self emit light for about 25 years with a half-life of 12.43 years; After 12.43 years, the brightness will decrease, and it will no longer emit light after about 25 years.
Installation method
1: Place the tritium tube into the groove and add glue (either by injecting with a syringe or dipping a toothpick). Do not add too much glue (try to cover the tritium tube completely with glue as little as possible, as too much will make it difficult to solidify and damage the tritium tube); 2: Wipe off excess glue, adjust the position of the tritium tube with a needle or toothpick, and then directly irradiate it with a UV violet lamp (for 3 minutes).
Caution: 1. Do not operate under the sun (yang)
Ultraviolet rays in light can cause specialized adhesives to solidify prematurely; 2: It's okay to expose for a long time, but it shouldn't be too short (if conditions permit, after installation, in the sun)
It's also possible to sunbathe for a whole day and half a day below
Additional note: If oil stains are found in the slot before installation, they can be cleaned with alcohol before installation; After installation, try not to touch the surface within 48 hours after the glue solidifies, in order to avoid blurring the surface or sticking dust and other things that affect transparency.
Brightness ranking: 1: Green; 2: Yellow; 3: White, ice blue; 4: Orange, pink; 5: Purple; 6: Red; 7: Purple blue.
Players often ask me which color looks good, which is subjective and difficult to answer. I suggest choosing the one I like based on my intuition
Color.
